07 December 2012

Make This: Holiday Banner

This DIY is so much fun! If you've never used iron on transfers before you're going to love them! (but please don't make any cheesy t-shirts...unless they're for a really good cause like running a 10k for the homeless...okay?)

Supplies:
1. Fabric of Choice
2. Dowel Rod
3. Green Thread
4. Transfer Paper
Not Shown: Scissors, Iron, Sewing Machine, Twine

Step 1: The first thing that you're going to want to do is decide what you want to print onto your banner. I went with a simple HO HO HO and found a really cute font that made me think of snow. You can download it here for free! Make sure that you read the directions for the transfer paper so that you'll know which is the proper side of the paper to print onto. Mine had a purple line to help me decipher. I always print on a plain piece of paper first to check the size and color to make sure that I like it.  
Note: When printing onto iron-on paper your image must be backwards or it will print incorrectly. Now, I am fully aware that HO and OH are the same backwards and forwards but I always make a habit of doing it just as a reminder. 
Step 2: Cut out your letters. With this step you're going to want to get as close as you can to the letters to prevent it from looking too plastic-y. You'll see what I mean when you iron them on. 
Step 3: Lay out your letters to see how big to make the banner. Most of you would probably do this the other way around, but as I'm sure you've already noticed I'm really a go-with-the-flow kind of girl and decided to just wing it. Measure out the banner and be sure to leave about an extra inch up top to make a loop hole for the dowel. 
Step 4: Sew your edges. I chose green thread to stick with the holiday theme, but you could choose a color closer to the fabric of your banner if you would like to hide the seam. This is especially a good idea if you're not very experienced in sewing, if your thread is too bright you'll be able to see each and every mistake. I like the small pop of color! Don't forget the loop at the top of the banner for your dowel to fit into. I used a small dowel so it was very easy to leave a big enough gap for it to pass through.
Step 5: Lay your letters on the banner ink side down. Make sure that they are in the exact spot that you would like because once you start this step you cant go back to move them. Make sure that there is no water in your iron and place the banner onto a hard surface - not your ironing board. Iron each letter for about 90 seconds and wait for it to cool. Peek under one of the letters to make sure that it transfered and then you're free to lift! This is the fun part!

Step 6: Slide the dowel in and hang! I used some thick twine to keep it simple - and thats it!

8 comments:

  1. This is so cute!! I would love to make this for a lovely door hanger instead of a wreath. Thanks for the lovely idea!!
    xx. McKenna Lou

    ReplyDelete
  2. you could start a Christmas 5k and call it "run to feed the ho ho homeless"
    everyone would be encouraged to wear Santa attire and then would get free milk and cookies at the end of the race...
    :)

    ReplyDelete
    Replies
    1. ummm...that might be the best idea ever! haha!!!

      Delete
  3. This is so great! I absolutely love how the letters fade - it makes it so modern!

    ReplyDelete
  4. Yes, it does look super modern and chic on that background, too! Beautiful tutorial. :-)

    ReplyDelete
  5. aw, so cute... i love your little christmas tree too! x

    ReplyDelete
  6. This is such a cute little holiday DIY! And your home looks adorable. That hutch is INCREDIBLE. Love how bright it is!

    ReplyDelete
  7. This is such a great project! The faded letters look awesome.

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...